Air grilles

Product Finder

layer

X-GRILLE Cover

The new X-GRILLE Cover ventilation grilles, made of high-quality aluminium combine function with an attractive design; they can be installed in walls, sills or rectangular ducts.

  • Nominal sizes 225 × 125 – 1225 × 525 mm
  • Volume flow rate range 16 – 2554 l/s or 58 – 9194 m³/h
  • Energy-efficient and acoustically optimised air discharge
  • Symmetric blade profile for two-way entry flow
  • Uniform look and easy adjustment due to concealed blade linkage
  • Concealed, optimised screw fixing
  • Linear look, ideal for continuous horizontal runs
  • Easily exchangeable cover plates allow for a lively two-colour look
  • Use of existing rear assemblies
  • Easy replacement of existing grilles due to standard installation dimensions


Optional equipment and accessories

  • Installation subframe
  • Attachments for volume flow rate balancing and air direction control
  • Concealed screw fixing
  • Spring clip fixing

read more

layer

TRSK

Ventilation grille with droplet shaped blades

  • Nominal sizes 225 × 75 – 1225 × 325 mm
  • Volume flow rate range 11 – 1305 l/s or 40 – 4698 m³/h
  • Grille face made of galvanised sheet steel
  • Front border with countersunk holes, 27 mm wide


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Installation subframe
  • Attachments for volume flow rate balancing and air direction control

read more

layer

Diffusion grilles types DG6 / DG8

The diffusion grilles are suitable for systems which require subtile flow-rate regulation, as is the case when several grilles are connected to the same pressure duct. The direction of air discharge is not influenced by the vertical countercurrent flaps.

read more

layer

TRS

Ventilation grille with droplet shaped blades

  • Nominal sizes 225 × 75 – 1225 × 325 mm
  • Volume flow rate range 11 – 1305 l/s or 40 – 4698 m³/h
  • Grille face made of sheet steel, powder-coated
  • Front border with countersunk holes, 27 mm wide


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Grille face made of galvanised sheet steel, without powder coating
  • Installation subframe
  • Installation subframe for fitting filter media
  • Attachments for volume flow rate balancing and air direction control
  • Concealed screw fixing

read more

layer

DIFFUSION GRILLES TYPE DGSELF

Diffusion grille with automatic temperature-dependent air stream deflection.
For energy-saving supply air systems in halls for (e.g. exhibitions, workshops, multi-purposes, warehouses etc.) where, apart from an effective distribution of air and the elimination of thermal stratification, great importance is attached to comfort in the working area at any point within the plant.

read more

layer

ASW

Hit and miss damper with airflow straighteners

  • Nominal sizes 225 × 75 – 1225 × 325 mm
  • Perimeter angle section frame

read more

layer

AWT

Ventilation grille with special profiled blades (rectangular cross section)

  • Nominal sizes 325 × 125 – 1225 × 325 mm
  • Volume flow rate range 17 – 950 l/s or 61 – 3420 m³/h
  • Grille face made of aluminium with anodised finish
  • Tested for installation in gymnasiums
  • Front border with countersunk holes, 30 mm wide


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Installation subframe

read more

layer

ASL

Ventilation grille with droplet shaped blades

  • Nominal sizes 225 × 125 – 1225 × 525 mm
  • Volume flow rate range 23 – 2000 l/s or 83 – 7200 m³/h
  • Grille face made of aluminium with anodised finish
  • Diffuser-type front border, 28 mm wide
  • Concealed screw fixing


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Installation subframe
  • Attachments for volume flow rate balancing and air direction control
  • Spring clip fixing

read more

Please select your disired product properties:
Ventilation grilles, made of high-quality aluminium – also for continuous horizontal runs Type X-GRILLE Cover

X-GRILLE Cover

Ventilation grilles, made of high-quality aluminium – also for continuous horizontal runs

read more

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into rectangular ducts Type TRS-K (duct installation)

TRSK

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into rectangular ducts

read more

DIFFUSION GRILLES TYPES DG6 / DG8

Diffusion grilles types DG6 / DG8

read more

Ventilation grilles, made of sheet steel, with individually adjustable, vertical blades Type TRS

TRS

Ventilation grilles, made of sheet steel, with individually adjustable, vertical blades

read more

DIFFUSION GRILLES TYPE DGSELF

DIFFUSION GRILLES TYPE DGSELF

read more

Hit and miss dampers, made of sheet steel, for installation into rectangular ducts Type ASW

ASW

Hit and miss dampers, made of sheet steel, for installation into rectangular ducts

read more

Ball impact resistant ventilation grille made of aluminium, with fixed horizontal blades Type AWT

AWT

Ball impact resistant ventilation grille made of aluminium, with fixed horizontal blades

read more

Ventilation grilles, made of aluminium, with individually adjustable, horizontal blades and diffuser-type front border Type ASL

ASL

Ventilation grilles, made of aluminium, with individually adjustable, horizontal blades and diffuser-type front border

read more

Ventilation grilles, made of aluminium, with fixed horizontal blades – also for horizontal runs Type AH

AH

Ventilation grilles, made of aluminium, with fixed horizontal blades – also for horizontal runs

read more

Ventilation grilles, made of aluminium, with fixed longitudinal blades, for floor installation – also for horizontal runs Type AF

AF

Ventilation grilles, made of aluminium, with fixed longitudinal blades, for floor installation – also for horizontal runs

read more

Ventilation grilles, made of aluminium, with individually adjustable, vertical blades Type VAT

VAT

Ventilation grilles, made of aluminium, with individually adjustable, vertical blades

read more

DIFFUSION GRILLES TYPE DGL

DIFFUSION GRILLES TYPE DGL

read more

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into circular ducts Type TRS-R (circular duct installation)

TRSR

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into circular ducts

read more

DIFFUSION GRILLES TYPES DG1 / DG3

DIFFUSION GRILLES TYPES DG1 / DG3

read more

Diffusion grilles type DGVAR

Diffusion grilles type DGVAR

read more

GRILLE DE DIFFUSION TYPE DGR

GRILLE DE DIFFUSION TYPE DGR

read more

Damper units, made of dip coated sheet steel, for installation into rectangular ducts Type AGW

AGW

Damper units, made of dip coated sheet steel, for installation into rectangular ducts

read more

Type KS

Type KS (Plastic Grilles)

read more

Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades and diffuser-type front border – also for horizontal runs Type SL

SL

Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades and diffuser-type front border – also for horizontal runs

read more

FLOOR GRILLE TYPE BG

FLOOR GRILLE TYPE BG

read more

Ventilation grilles with flat border construction – also for continuous horizontal runs Type X-GRILLE Basic

X-GRILLE-Basic

Ventilation grilles with flat border construction – also for continuous horizontal runs

read more

Ventilation grilles, made of aluminium, with individually adjustable, horizontal blades Type AT

AT

Ventilation grilles, made of aluminium, with individually adjustable, horizontal blades

read more

Damper units, made of dip coated sheet steel, with air control blades, for installation into rectangular ducts Type DGW

DGW

Damper units, made of dip coated sheet steel, with air control blades, for installation into rectangular ducts

read more

Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades Type TR

TR

Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades

read more

Non-vision air transfer grilles, made of aluminium, with fixed horizontal blades Type AGS

AGS

Non-vision air transfer grilles, made of aluminium, with fixed horizontal blades

read more

Grille cores made of aluminium, with fixed horizontal blades Type EF · EFG

EF

Grille cores made of aluminium, with fixed horizontal blades

read more

Linear grilles type LG

Linear grilles type LG

read more

DIFFUSION GRILLES TYPE DGX

DIFFUSION GRILLES TYPE DGX

read more

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171