Type CA

For the reduction of noise in circular ducts, galvanised sheet steel construction

Circular silencers Type CA for the reduction of noise in the circular ducts of air conditioning systems

  • Absorption material is non-combustible mineral wool with RAL quality mark, biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EC
  • Mineral wool faced with non-woven glass fibre as protection against erosion due to airflow velocities up to 20 m/s
  • Casing and perforated inner duct are galvanised sheet steel
  • Variant with spigot has a groove for a lip seal, suitable for circular connecting ducts to EN 1506 or EN 13180
  • Insertion loss measured according to ISO 7235
  • Casing air leakage to EN 15727, class B

Optional equipment and accessories

  • With flanges on both ends
  • With lip seals on both ends

Circular silencer Type CA 00131776_0
  • Application
  • Description

Application

  • Circular silencers Type CA for the reduction of noise in the circular ducts of air conditioning systems
  • For the reduction of air-regenerated noise of air terminal units such as LVC and TVR, and of mechanical self-powered controllers such as RN and VFC
  • For the reduction of fan noise
  • Can be used as cross talk silencer to reduce the transfer of noise through ducts between neighbouring rooms

Special features

  • Insertion loss measured according to ISO 7235
  • Absorption material is non-combustible
  • Insulation thickness 50 mm or 100 mm

Variants

  • 050: Circular silencer with 50 mm insulation
  • 100: Circular silencer with 100 mm insulation
  • VF1: Circular silencer with flange on one end
  • VF2: Circular silencer with flanges on both ends
  • Special versions upon request

Parts and characteristics

  • Casing
  • Perforated inner tube
  • Absorption material

Accessories

  • GE: Matching flange for one end
  • GZ: Matching flanges for both ends
  • VD2: Lip seals on both ends (factory fitted)

Construction features

  • Circular casing
  • Spigot suitable for circular ducts to EN 1506 or EN 13180
  • Spigot with groove for lip seal
  • Operating pressure up to 1000 Pa
  • Operating temperature up to 100 °C

Materialien und Oberflächen

  • Mantel und gelochtes Innenrohr aus verzinktem Stahlblech
  • Auskleidung aus Mineralwolle


Mineralwolle

  • Nach EN13501, Baustoffklasse A1, nicht brennbar
  • RAL-Gütezeichen RAL-GZ 388
  • Hygienisch unbedenklich durch hohe Biolöslichkeit, nach TRGS 905 sowie EU-Richtlinie 97/69/EG
  • Durch Glasvlies vor Abrieb durch strömende Luft bis max. 20 m/s geschützt
  • Inert gegenüber Pilz- und Bakterienwachstum

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171