Type FK-EU

  • Rectangular fire damper 
  • Certified by VNIIPO Pozhtest of the Emergency Ministry of the Russian Federation  C-DE.ПБ01.В.02584
  • Complies with the requirements of EN 15650
  • DoP / FK-EU / DE / 002
  • EG Certificate of conformity BC1 - 606 - 4645 - 15650.11 - 4651 
  • Tested to EN 1366-2 for fire resistance properties
  • Classification to EN 13501-3, up to EI 180 (ve, ho, i ↔ o) S
  • Low differential pressure and sound power level
  • Easy mortar-based installation and dry mortarless installation 
  • Integration into the central BMS with TROXNETCOM


Serie FK-EU
  • Description
  • Characteristics

In the event of a fire, fire dampers shut automatically to prevent the propagation of fire and smoke through ductwork to adjacent designated fire compartments. FK-EU fire dampers complies with the requirements to EN 1366-2 and EN 15650. In addition to this, national guidelines must be complied with.

For mortar-based installation and dry mortarless installation into solid walls and ceiling slabs, mortar-based installation into non-load-bearing solid walls with flexible ceiling joint, mortar-based and dry mortarless installation into lightweight partition walls, lightweight partition walls with cladding on both sides, lightweight fire walls and lightweight shaft walls. Fire dampers are used for the connection to ducts made of non-combustible or combustible materials, suitable for any airflow direction. In the event of a fire, the damper is triggered at 72 °C or at 95 °C (use in warm air ventilation systems) by a fusible link or  thermoelectrically by the spring return actuator. The release mechanism is accessible and can be tested from the outside. The fire damper has two inspection access panels. Class of performance complies to EN 13501-3, up to EI 180 (ve, ho, i ↔ o) S and depends on application.


  • Rectangular or square construction, rigid casing, both flanges with fixing holes
  • B × H: 200 × 200 – 1500 × 800 mm (in increments of 1 mm))
  • L: 375 mm or 500 mm
  • Classification to EN 13501-3, up to EI 180 (ve, ho, i ↔ o) S


Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171