Type DID632

Active chilled beam with two-way air discharge and horizontal heat exchanger, suitable for grid ceilings with grid size 600 or 625

 

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems

  • Preferably for room heights up to 4.20 m
  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
  • Four nozzle variants to optimise induction based on demand
  • Hinged, removable induced air grille in four designs


Optional equipment and accessories

  • Control package
  • Also available as supply and extract air combination
  • Adjustable air control blades to control the airflow
  • Heat exchanger powder-coated black
  • Powder coating in many different colours, e.g. RAL CLASSIC or NCS
small_tab1_Serie DID 632
  • Application
  • Description

Application

  • Active chilled beams of Type DID632 for the integration into various ceiling systems, preferably for room heights up to 4.20 m
  • Particularly suitable for grid ceilings with grid size 600 or 625
  • 2-pipe or 4-pipe heat exchangers enable good comfort levels with a low conditioned primary air volume flow rate
  • Energy-efficient solution since water is used as a medium for heating and cooling
  • Adjustable air control blades (optional) allow for the manual adjustment of the air discharge direction

Special characteristics

  • Adjustable air control blades to control the airflow
  • Hinged, removable induced air grille in four designs
  • Horizontal heat exchanger as 2-pipe or 4-pipe system
  • Water connections at the narrow side, Ø12 mm Cu pipe, either with plain tails or with G½" external thread and flat seal
  • Internal nozzle plate with punched nozzles (non-combustible)

Variants

  • DID632-LR: With induced air grille – perforated sheet metal, circular holes
  • DID632-LQ: With induced air grille – perforated sheet metal, square holes
  • DID632-GL: With induced air grille – longitudinal blades
  • DID632-GQ: With induced air grille – transverse blades

Construction

  • Powder-coated RAL 9010, pure white, gloss level 50 %
  • P1: Powder-coated in any other RAL colour, gloss level 70 %
  • P1: Powder-coated RAL 9006, white aluminium, gloss level 30 %

Attachments

  • Extract air spigot (45° connection) for supply and extract air combination
  • Adjustable air control blades

Useful additions

  • Connecting hoses
  • Control equipment consisting of a control panel including a controller with integral room temperature sensor; valves and valve actuators; and compression couplers

Construction features

  • Spigot is suitable for circular ducts to EN 1506 or EN 13180
  • Four suspension points for on-site installation (by others)
  • Four nozzle variants to optimise induction based on demand
  • Integral extract air spigot (optional)

Materials and surfaces

  • Casing, front frame, nozzle plate, and perforated induced air grille (LR/LQ) made of galvanised sheet steel
  • Blades of the induced air grille (GL/GQ) made of aluminium sections
  • Heat exchanger with copper tubes and aluminium fins
  • Exposed surfaces are powder-coated pure white (RAL 9010) or in any other RAL colour
  • Heat exchanger also in black (RAL 9005)
  • Extract air spigot made of galvanised sheet steel
  • Air control blades made of polypropylene, UL 94, flame retardant (V0)

Technical information

  • Function
  • Technical data
  • Quick sizing
  • Specification text
  • Order code
did632

Functional description

Active chilled beams provide centrally conditioned primary air (fresh air) to the room and use heat exchangers for additional cooling and/or heating.

The primary air is discharged through nozzles (four variants are available) into the mixing chambers; as a result of this, secondary air (room air) is induced via the induced air grille and passes through the horizontal heat exchanger, where it is heated or cooled.

Primary and secondary air mix and are then supplied to the room horizontally through the supply air slots.

did632
did632

 

Active chilled beams of Type DID632, with two-way air discharge and high thermal output, providing high thermal comfort levels.

For installation flush with the ceiling, preferably in rooms with a height up to 4.20 m.

The units consist of a casing with suspension points, a spigot, non-combustible nozzles, and a horizontal heat exchanger.

Nozzles in four sizes to optimise induction based on demand.

Special characteristics

  • Adjustable air control blades to control the airflow
  • Hinged, removable induced air grille in four designs
  • Horizontal heat exchanger as 2-pipe or 4-pipe system
  • Water connections at the narrow side, Ø12 mm Cu pipe, either with plain tails or with G½" external thread and flat seal
  • Internal nozzle plate with punched nozzles (non-combustible)

Materials and surfaces

  • Casing, front frame, nozzle plate, and perforated induced air grille (LR/LQ) made of galvanised sheet steel
  • Blades of the induced air grille (GL/GQ) made of aluminium sections
  • Heat exchanger with copper tubes and aluminium fins
  • Exposed surfaces are powder-coated pure white (RAL 9010) or in any other RAL colour
  • Heat exchanger also in black (RAL 9005)
  • Extract air spigot made of galvanised sheet steel
  • Air control blades made of polypropylene, UL 94, flame retardant (V0)

Construction

  • Powder-coated RAL 9010, pure white, gloss level 50 %
  • P1: Powder-coated in any other RAL colour, gloss level 70 %
  • P1: Powder-coated RAL 9006, white aluminium, gloss level 30 %

Technical data

  • Nominal length: 900, 1200, 1500, 1800, 2100, 2400, 2700, 3000 mm
  • Length: 893 – 3000 mm
  • Height: 210 mm
  • Width: 593, 598, 618, 623 mm
  • Primary air spigot, diameter: 123/158 mm
  • Primary air volume flow rate: 6 – 85 l/s, 22 – 306 m³/h
  • Cooling capacity: up to 2450 W
  • Heating capacity: up to 2970 W
  • Max. operating pressure: 6 bar
  • Max. operating temperature: 75 °C
did632

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171