Type VSD50-1-LT

For the space saving installation into lightweight partition walls with a metal support structure

Slot diffusers with 50 mm diffuser face (nominal width) and adjustable air control elements

  • Nominal length: 550, 1175 mm, 1 slot
  • Volume flow rate range 10 – 70 l/s or 36 – 252 m³/h
  • Diffuser face made of extruded aluminium sections
  • For variable and constant volume flows
  • Installation into lightweight partition walls with a 50 mm wide metal support structure and a wall thickness of 100 mm
  • Diffuser face with spring clip fixing
  • High induction results in a rapid reduction of the temperature difference and airflow velocity
  • Individually adjustable air control elements to meet individual local requirements


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colours
  • Damper blade for volume flow rate balancing, can be adjusted through the diffuser face

VSD50-1-LT-AZ-M-L/1175 00142859_0
  • Application
  • Description

Application

  • Type VSD50-1-LT slot diffusers are used as supply air or extract air devices or as supply and extract air combinations in comfort zones
  • Angled one-way air discharge for turbulent flow (mixed flow ventilation)
  • High induction results in a rapid reduction of the temperature difference and airflow velocity (supply air variant)
  • For variable and constant volume flows
  • For supply air to room air temperature differences from –10 to +10 K
  • For room heights up to 4 m (lower edge of suspended ceiling)
  • For the space saving installation into lightweight partition walls with a 50 mm wide metal support structure and a wall thickness of 100 mm

Special characteristics

  • Individually adjustable air control elements to meet individual local requirements
  • High induction results in a rapid reduction of the temperature difference and airflow velocity
  • Diffuser face has been optimised for maximum volume flow rate at low sound power levels
  • Internal acoustic lining that reduces room-to-room cross talk through the ductwork
  • Diffuser face with spring clip fixing that allows for easy installation of the diffuser face after drywalling is complete

Nominal sizes

  • LN: 550, 1175 mm

Variants

  • VSD50 -1-LT: Slot diffuser for supply air or extract air
  • VSD50 -1-LT-AZ: Slot diffuser as a supply and extract air combination (only LN 1175 mm)
  • VSD50 -1-LT-.../WW: White air control elements

Parts and characteristics

  • Diffuser face with individually adjustable air control elements
  • Plenum box for horizontal duct connection
  • Internal acoustic lining to increase transmission loss
  • Spring clip fixing

Attachments

  • Damper blade for volume flow rate balancing

Accessories

  • Lip seal

Construction features

  • Spigot suitable for circular ducts to EN 1506 or EN 13180
  • Spigot with groove for lip seal (if accessory lip seal has been ordered)

Materials and surfaces

  • Diffuser face made from extruded aluminium sections
  • Air control elements made of plastic, UL 94, V-0, flame retardant
  • Plenum box made of galvanised sheet steel
  • End angle made of aluminium
  • Lip seal made of rubber
  • Acoustic lining is mineral wool
  • Diffuser face with anodised finish, E6-C-0, natural colour
  • P1: Powder-coated, RAL CLASSIC colour
  • Air control elements similar to RAL 9005, black
  • WW: Air control elements similar to RAL 9010, white


Mineral wool

  • To EN 13501, fire rating class A1, non-combustible
  • RAL quality mark RAL-GZ 388
  • Biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EG
  • Faced with glass fibre fabric as a protection against erosion through airflow velocities of up to 20 m/s
  • Inert to fungal and bacterial growth

Standards and guidelines

  • Sound power level of the air-regenerated noise measured according to EN ISO 5135

Maintenance

  • Maintenance-free as construction and materials are not subject to wear
  • Inspection and cleaning to VDI 6022

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171