Secondary silencer

layer

TX

Rectangular secondary silencers for the reduction of air-regenerated noise of air terminal units Type TVJ, TVT or EN

  • Absorption material is non-combustible mineral wool with RAL quality mark, biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EG
  • Mineral wool faced with glass fibre fabric as protection against erosion due to airflow velocities up to 20 m/s
  • Insertion loss measured according to ISO 7235
  • Casing air leakage to EN 15727, class A

read more

layer

CF

Circular silencers, in flexible aluminium construction, for the reduction of noise in the circular ducts of air conditioning systems

  • Absorption material is non-combustible mineral wool with RAL quality mark, biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EC
  • Casing and perforated inner duct made of aluminium
  • Variant with spigot has a groove for a lip seal, suitable for circular connecting ducts to EN 1506 or EN 13180
  • Insertion loss measured according to ISO 7235
  • Casing air leakage to EN 15727, class D


Optional equipment and accessories

  • Socket-type spigots on both ends
  • Raised edges at both ends
  • With lip seals on both ends

read more

layer

CA

Circular silencers Type CA for the reduction of noise in the circular ducts of air conditioning systems

  • Absorption material is non-combustible mineral wool with RAL quality mark, biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EC
  • Mineral wool faced with non-woven glass fibre as protection against erosion due to airflow velocities up to 20 m/s
  • Casing and perforated inner duct are galvanised sheet steel
  • Variant with spigot has a groove for a lip seal, suitable for circular connecting ducts to EN 1506 or EN 13180
  • Insertion loss measured according to ISO 7235
  • Casing air leakage to EN 15727, class B

Optional equipment and accessories

  • With flanges on both ends
  • With lip seals on both ends

read more

layer

CAK

Plastic circular silencers for the reduction of noise in the circular ducts of extract air systems for aggressive media

  • Absorption material is non-combustible mineral wool with RAL quality mark, biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EC
  • Mineral wool faced with non-woven glass fibre as protection against erosion due to airflow velocities up to 20 m/s
  • Casing and perforated inner duct are flame-resistant polypropylene (PPs) to DIN 4102, building class B1
  • Variant with spigot suitable for circular ducts according to DIN 8077 or DIN 8078
  • Insertion loss measured according to ISO 7235
  • Casing air leakage to EN 15727, class D


Optional equipment and accessories

  • With flanges on both ends

read more

layer

TS

Rectangular secondary silencers for the reduction of air-regenerated noise of air terminal units Type TVZ, TVA, TZ-Silenzio, TA-Silenzio or TVM

  • Absorption material is non-combustible mineral wool with RAL quality mark, biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EG
  • Mineral wool faced with glass fibre fabric as protection against erosion due to airflow velocities up to 20 m/s
  • Insertion loss measured according to ISO 7235
  • Casing air leakage to EN 15727, class B

read more

layer

CS

Circular silencers, in rigid aluminium construction, for the reduction of noise in the circular ducts of air conditioning systems

  • Absorption material is non-combustible mineral wool with RAL quality mark, biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EC
  • Casing and perforated inner duct made of aluminium
  • Variant with spigot has a groove for a lip seal, suitable for circular connecting ducts to EN 1506 or EN 13180
  • Insertion loss measured according to ISO 7235
  • Casing air leakage to EN 15727, class D


Optional equipment and accessories

  • Socket-type spigots on both ends
  • Raised edges at both ends
  • With lip seals on both ends

read more

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +7 495 221-5161 | Fax: +7 495 221-5171