TFP

Pharmaceutical clean room terminal filter type TFP for ceiling installation as final filter stage and for air distribution in sensitive areas of the pharmaceutical industry.

Fitting of filter elements for the separation of suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply or extract air.

Welded filter casing for fixing the Mini Pleat filter panels, with a fluid seal on the downstream side.

With side entry or top entry spigot. Side entry spigot can be removed if desired.

Pressing the Mini Pleat filter panels is performed by four patented turn clips.

Casing with mounted pressure measurement points to monitor the operating differential pressure and with internal measuring tube.

Diffuser face plate made of sheet steel, powder-coated (RAL 9010), types FD and TDF; can be hinged down to facilitate disassembly and cleaning.

Leakage test for each casing.

Special characteristics

• Compact construction
• Flush ceiling installation

• Removable spigot on the side for installation in closed ceilings

• Diffuser face plate can be hinged down
• Filter change with patented turn clip
  
• Supports for mounting in false ceilings
  

Materials and surfaces

• Casing and diffuser face plate made of sheet steel, powder-coated RAL 9010, pure white

Construction

• Sheet steel, powder-coated RAL 9010, pure white

TFP-TC-S

• Top entry circular spigot, hanging brackets at the top on the side

TFP-FC

• Top entry circular spigot, with supports for mounting in false ceilings

TFP-SC-S

• Side entry circular spigot, hanging brackets at the top on the side
  
  

TFP-FC

• Side entry circular spigot, with supports for mounting in false ceilings
  

TFP-SCR-S

• Side entry circular spigot, removable, hanging brackets at the top on the side
  

TFP-SCR-FC

• Side entry circular spigot, removable, with supports for mounting in false ceilings
  

All weights are net, without packaging

Installation and commissioning

• Fitting of filter elements with a fluid seal on the downstream side
• Pressing of the filter element is performed by four turn clips
• Diffuser face plate is hinged and held in place by magnets; no additional tools required